Tecno Spark 3 Pro (2019) review
The Tecno Spark 3 Pro (S3PRO) smartphone released in 2019. It is powered by Mediatek Helio A22 MT6765 chipset, 2 GB of RAM and 32 GB of internal storage.
The Tecno Spark 3 Pro runs on Android OS v9.0 (Pie) out of the box. It comes with a Li-Po 3500 mAh, non-removable battery. It features a 6.2 inches IPS display with 720 x 1500 px resolution. The IPS technology is one of the most leading LCD technologies in the world.
Table of contents:
Tecno Spark 3 Pro (S3PRO) specifications
- Spark 3 Pro
- 154.29 x 75.54 x 7.88 mm
- SIM type
- Nano SIM
The Tecno Spark 3 Pro runs on Android OS v9.0 (Pie) out of the box, but the Spark 3 Pro's firmware can be upgraded to a newer version of OS.
- Android OS v9.0 (Pie)
- Mediatek Helio A22 MT6765
- Quad-core 2 GHz Cortex-A53
- PowerVR GE8300
Screen size is measured in inches, diagonally from corner to corner. The 6.2 inches IPS capacitive touch screen with 720 x 1500 px resolution is multitouch capable.
- 6.2 inches
- 720 x 1500 px
The smartphone's memory (2 GB) cannot be expanded, but the storage (32 GB) can be expanded with a microSD card.
- 2 GB
- Internal storage
- 32 GB
- External storage
The camera of the Tecno Spark 3 Pro is equipped with autofocus. Autofocus is a camera feature that fine-tunes the focus of the camera, it is a nice feature of this smartphone.
- Front camera
- 8 MP
- Rear camera
- 13 + 2 MP
4160 x 3120 px
Spark 3 Pro is 3G and 4G capable. This smartphone has a built-in GPS receiver. GPS is a satellite based navigation system that allows the determination of the exact geographical location on Earth. This Tecno smartphone has FM radio receiver.
- 850 / 900 / 1800 / 1900
- Mobile network
- 2G / 3G / 4G
- Wi-Fi 802.11 b/g/n
- v4.0, A2DP
- FM radio
- microUSB 2.0
- 3.5 mm jack
The Li-Po 3500 mAh, non-removable battery gives the smartphone a good battery backup.
- Li-Po 3500 mAh, non-removable
The smartphone sensors measure physical quantities and transmit them to the application processor. The phones's accelerometer is a built-in electronic component that measures tilt and motion. A fingerprint sensor is one of the easiest and most secure ways to protect your smartphone. The proximity sensor detects when a user is holding the phone near their face during a call and turns off the display to prevent keypad presses and battery consumption from the display. The Spark 3 Pro has Dual SIM capability, which means that you can insert two different SIM cards and use them both from one phone.
- Dual SIM
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Tecno Spark 3 Pro, then don’t hesitate and signal the problem to us.
Tecno Spark 3 Pro (S3PRO) pictures
If there’s information about the Tecno Spark 3 Pro that you would like to see on this site, then write to our firstname.lastname@example.org address.