Kyocera DuraForce PRO 2018 (2018) review
The Kyocera DuraForce PRO 2018 (KC-S702) smartphone released in 2018. It is powered by Qualcomm Snapdragon 617 MSM8952 chipset, 2 GB of RAM and 32 GB of internal storage.
The Kyocera DuraForce PRO 2018 runs on Android OS v7.1.2 (Nougat) out of the box. It comes with a Li-Ion 3240 mAh, non-removable battery. It features a 5 inches IPS display with 1080 x 1920 px resolution. The IPS technology is one of the most leading LCD technologies in the world.
Table of contents:
- Kyocera DuraForce PRO 2018 specifications
- Kyocera DuraForce PRO 2018 pictures
- Kyocera DuraForce PRO 2018's comparisons
Kyocera DuraForce PRO 2018 (KC-S702) specifications
- DuraForce PRO 2018
- 230 g
- 148.4 x 73.4 x 12.9 mm
- SIM type
- Nano SIM
The Kyocera DuraForce PRO 2018 runs on Android OS v7.1.2 (Nougat) out of the box, but the DuraForce PRO 2018's firmware can be upgraded to a newer version of OS.
- Android OS v7.1.2 (Nougat)
- Qualcomm Snapdragon 617 MSM8952
- Octa-core, Quad-core 1.5 GHz Cortex-A53, Quad-core 1.2 GHz Cortex-A53
- Adreno 405
Screen size is measured in inches, diagonally from corner to corner. The 5 inches IPS capacitive touch screen with 1080 x 1920 px resolution is multitouch capable.
- 5 inches
- 1080 x 1920 px
The smartphone's memory (2 GB) cannot be expanded, but the storage (32 GB) can be expanded with a microSD card.
- 2 GB
- Internal storage
- 32 GB
- External storage
The camera of the Kyocera DuraForce PRO 2018 is equipped with autofocus. Autofocus is a camera feature that fine-tunes the focus of the camera, it is a nice feature of this smartphone.
- Front camera
- 5 MP
- Rear camera
- 13 + 2 MP
4160 x 3120 px
DuraForce PRO 2018 is 3G and 4G capable. This smartphone has a built-in GPS receiver. GPS is a satellite based navigation system that allows the determination of the exact geographical location on Earth. The DuraForce PRO 2018 comes with Near Field Communications (NFC) functionality for transferring content with other NFC-enabled devices. This Kyocera smartphone has FM radio receiver.
- 850 / 900 / 1800 / 1900
- Mobile network
- 2G / 3G / 4G
- Wi-Fi 802.11 a/b/g/n/ac
- v4.2, A2DP
- FM radio
- microUSB 2.0
- 3.5 mm jack
The Li-Ion 3240 mAh, non-removable battery gives the smartphone a good battery backup. This is a low maintenance battery. No periodic discharge is needed and charging can be done at random.
- Li-Ion 3240 mAh, non-removable
The smartphone sensors measure physical quantities and transmit them to the application processor. The phones's accelerometer is a built-in electronic component that measures tilt and motion. A fingerprint sensor is one of the easiest and most secure ways to protect your smartphone. The proximity sensor detects when a user is holding the phone near their face during a call and turns off the display to prevent keypad presses and battery consumption from the display.
- Fast charging
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Kyocera DuraForce PRO 2018, then don’t hesitate and signal the problem to us.
Kyocera DuraForce PRO 2018 (KC-S702) pictures
Kyocera DuraForce PRO 2018's (KC-S702) comparisons
According to our statistics, the Kyocera DuraForce PRO 2018 smartphone was most often compared on our site with the following smartphones.
If there’s information about the Kyocera DuraForce PRO 2018 that you would like to see on this site, then write to our firstname.lastname@example.org address.