Huawei P Smart+ (2018) review
The Huawei P Smart+ (INE-LX1) smartphone released in 2018. It is powered by HiSilicon Kirin 710 chipset, 4 GB of RAM and 64 GB of internal storage.
The Huawei P Smart+ runs on Android OS v8.1 (Oreo) out of the box. It comes with a Li-Po 3340 mAh, non-removable battery. It features a 6.3 inches IPS display with 1080 x 2340 px resolution. The IPS technology is one of the most leading LCD technologies in the world.
Table of contents:
Huawei P Smart+ (INE-LX1) specifications
- P Smart+
- 169 g
- 157.6 x 75.2 x 7.6 mm
- SIM type
- Nano SIM
The Huawei P Smart+ runs on Android OS v8.1 (Oreo) out of the box, but the P Smart+'s firmware can be upgraded to a newer version of OS.
- Android OS v8.1 (Oreo)
- HiSilicon Kirin 710
- Octa-core, Quad-core 2.2 GHz Cortex-A53, Quad-core 1.7 GHz Cortex-A53
- Mali-G51 MP4
Screen size is measured in inches, diagonally from corner to corner. The 6.3 inches IPS capacitive touch screen with 1080 x 2340 px resolution is multitouch capable.
- 6.3 inches
- 1080 x 2340 px
The smartphone's memory (4 GB) cannot be expanded, but the storage (64 GB) can be expanded with a microSD card.
- 4 GB
- Internal storage
- 64 GB
- External storage
The camera of the Huawei P Smart+ is equipped with autofocus. Autofocus is a camera feature that fine-tunes the focus of the camera, it is a nice feature of this smartphone.
- Front camera
- 24 + 2 MP
- Rear camera
- 16 + 2 MP
4608 x 3456 px
P Smart+ is 3G and 4G capable. This smartphone has a built-in GPS receiver. GPS is a satellite based navigation system that allows the determination of the exact geographical location on Earth. This Huawei smartphone doesn't have FM radio receiver.
- 850 / 900 / 1800 / 1900
- Mobile network
- 2G / 3G / 4G
- Wi-Fi 802.11 b/g/n
- v4.2, A2DP
- A-GPS, GLONASS
- FM radio
- microUSB 2.0
- 3.5 mm jack
The Li-Po 3340 mAh, non-removable battery gives the smartphone a good battery backup.
- Li-Po 3340 mAh, non-removable
The smartphone sensors measure physical quantities and transmit them to the application processor. The phones's accelerometer is a built-in electronic component that measures tilt and motion. A fingerprint sensor is one of the easiest and most secure ways to protect your smartphone. The proximity sensor detects when a user is holding the phone near their face during a call and turns off the display to prevent keypad presses and battery consumption from the display. The P Smart+ has Dual SIM capability, which means that you can insert two different SIM cards and use them both from one phone.
- Dual SIM
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Huawei P Smart+, then don’t hesitate and signal the problem to us.
Huawei P Smart+ (INE-LX1) pictures
Huawei P Smart+'s (INE-LX1) comparisons
According to our statistics, the Huawei P Smart+ smartphone was most often compared on our site with the following smartphones.
If there’s information about the Huawei P Smart+ that you would like to see on this site, then write to our firstname.lastname@example.org address.