Highscreen Spark 2 (2015) review
The detailed specifications, photos and introductory video of the Highscreen Spark 2 (SPARK2). The list of the competitors most often compared to the Highscreen Spark 2 smartphone.
The Highscreen Spark 2 (SPARK2) smartphone released in 2015. It is powered by Qualcomm Snapdragon 200 MSM8212 chipset, 512 MB of RAM and 4 GB of internal storage.
The Highscreen Spark 2 runs on Android OS v4.4 (KitKat) out of the box. It comes with a Li-Ion 1420 mAh battery. It features a 4 inches TFT display with 480 x 800 px resolution. A thin-film-transistor (TFT) LCD display is a variant of a liquid-crystal display (LCD).
Table of contents:
Highscreen Spark 2 (SPARK2) specifications
- Spark 2
- 108 g
- 122.4 x 64.5 x 9.69 mm
- SIM type
- Mini SIM
The Highscreen Spark 2 runs on Android OS v4.4 (KitKat) out of the box, but the Spark 2's firmware can be upgraded to a newer version of OS.
- Android OS v4.4 (KitKat)
- Qualcomm Snapdragon 200 MSM8212
- Quad-core 1.2 GHz Cortex-A7
- Adreno 302
Screen size is measured in inches, diagonally from corner to corner. The 4 inches TFT capacitive touch screen with 480 x 800 px resolution is multitouch capable.
- 4 inches
- 480 x 800 px
The smartphone's memory (512 MB) cannot be expanded, but the storage (4 GB) can be expanded with a microSD card.
- 512 MB
- Internal storage
- 4 GB
- External storage
The camera of the Highscreen Spark 2 has no autofocus capability (fixed-focus). Autofocus is a camera feature that fine-tunes the focus of the camera. When you try to take a photo of a nearby object with an autofocusless camera, you will discover that your photo isn't very sharp.
- Front camera
- Rear camera
- 2 MP
1600 x 1200 px
This smartphone has a built-in GPS receiver. GPS is a satellite based navigation system that allows the determination of the exact geographical location on Earth. This Highscreen smartphone has FM radio receiver.
- 850 / 900 / 1800 / 1900
- Mobile network
- 2G / 3G
- Wi-Fi 802.11 b/g/n
- v4.0, A2DP
- A-GPS, GLONASS
- FM radio
- microUSB 2.0
- 3.5 mm jack
The Li-Ion 1420 mAh battery gives the smartphone a good battery backup. This is a low maintenance battery. No periodic discharge is needed and charging can be done at random.
- Li-Ion 1420 mAh
The smartphone sensors measure physical quantities and transmit them to the application processor. The phones's accelerometer is a built-in electronic component that measures tilt and motion. The proximity sensor detects when a user is holding the phone near their face during a call and turns off the display to prevent keypad presses and battery consumption from the display. The Spark 2 has Dual SIM capability, which means that you can insert two different SIM cards and use them both from one phone.
- Dual SIM
- Official site
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Highscreen Spark 2, then don’t hesitate and signal the problem to us.
Highscreen Spark 2 (SPARK2) pictures
Highscreen Spark 2's (SPARK2) comparisons
According to our statistics, the Highscreen Spark 2 smartphone was most often compared on our site with the following smartphones.
If there’s information about the Highscreen Spark 2 that you would like to see on this site, then write to our email@example.com address.