Fujitsu Arrows Be3 F-02L (2019) review
The Fujitsu Arrows Be3 F-02L (F-02L) smartphone released in 2019. It is powered by Qualcomm Snapdragon 450 chipset, 3 GB of RAM and 32 GB of internal storage.
The Fujitsu Arrows Be3 F-02L runs on Android OS v9.0 (Pie) out of the box. It comes with a Li-Po 2780 mAh, non-removable battery.
Table of contents:
- Fujitsu Arrows Be3 F-02L specifications
- Fujitsu Arrows Be3 F-02L pictures
- Fujitsu Arrows Be3 F-02L's comparisons
Fujitsu Arrows Be3 F-02L (F-02L) specifications
- Arrows Be3 F-02L
- 145 g
- 147 x 70 x 8.9 mm
- SIM type
- Nano SIM
The Fujitsu Arrows Be3 F-02L runs on Android OS v9.0 (Pie) out of the box, but the Arrows Be3 F-02L's firmware can be upgraded to a newer version of OS.
Screen size is measured in inches, diagonally from corner to corner. The 5.6 inches OLED capacitive touch screen with 1080 x 2220 px resolution is multitouch capable.
- 5.6 inches
- 1080 x 2220 px
The smartphone's memory (3 GB) cannot be expanded, but the storage (32 GB) can be expanded with a microSD card.
- 3 GB
- Internal storage
- 32 GB
- External storage
The camera of the Fujitsu Arrows Be3 F-02L is equipped with autofocus. Autofocus is a camera feature that fine-tunes the focus of the camera, it is a nice feature of this smartphone.
- Front camera
- 8 MP
- Rear camera
- 12 MP
4032 x 3024 px
Arrows Be3 F-02L is 3G and 4G capable. This smartphone has a built-in GPS receiver. GPS is a satellite based navigation system that allows the determination of the exact geographical location on Earth. The Arrows Be3 F-02L comes with Near Field Communications (NFC) functionality for transferring content with other NFC-enabled devices. This Fujitsu smartphone has FM radio receiver.
- 850 / 900 / 1800 / 1900
- Mobile network
- 2G / 3G / 4G
- Wi-Fi 802.11 a/b/g/n/ac
- v4.2, A2DP
- FM radio
- USB Type-C
- 3.5 mm jack
The Li-Po 2780 mAh, non-removable battery gives the smartphone a good battery backup.
- Li-Po 2780 mAh, non-removable
The smartphone sensors measure physical quantities and transmit them to the application processor. The phones's accelerometer is a built-in electronic component that measures tilt and motion. A fingerprint sensor is one of the easiest and most secure ways to protect your smartphone. The proximity sensor detects when a user is holding the phone near their face during a call and turns off the display to prevent keypad presses and battery consumption from the display.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fujitsu Arrows Be3 F-02L, then don’t hesitate and signal the problem to us.
Fujitsu Arrows Be3 F-02L (F-02L) pictures
If there’s information about the Fujitsu Arrows Be3 F-02L that you would like to see on this site, then write to our email@example.com address.