Bluboo Xfire 2 (2016) review
The Bluboo Xfire 2 (XFIRE2) smartphone released in 2016. It is powered by Mediatek MT6580A chipset, 1 GB of RAM and 8 GB of internal storage.
The Bluboo Xfire 2 runs on Android OS v5.1 (Lollipop) out of the box. It comes with a Li-Po 2150 mAh, non-removable battery. It features a 5 inches IPS display with 720 x 1280 px resolution. The IPS technology is one of the most leading LCD technologies in the world.
Table of contents:
Bluboo Xfire 2 (XFIRE2) specifications
- Xfire 2
- ★★★★★ Rated 3/5 based on 1 user votes.
- 135 g
- 142 x 70.5 x 7.6 mm
- SIM type
- Micro SIM
The Bluboo Xfire 2 runs on Android OS v5.1 (Lollipop) out of the box, but the Xfire 2's firmware can be upgraded to a newer version of OS.
- Android OS v5.1 (Lollipop)
- Mediatek MT6580A
- Quad-core 1.3 GHz Cortex-A7
- Mali-400 MP1
Screen size is measured in inches, diagonally from corner to corner. The 5 inches IPS capacitive touch screen with 720 x 1280 px resolution is multitouch capable.
- 5 inches
- 720 x 1280 px
The smartphone's memory (1 GB) cannot be expanded, but the storage (8 GB) can be expanded with a microSD card.
- 1 GB
- Internal storage
- 8 GB
- External storage
The camera of the Bluboo Xfire 2 is equipped with autofocus. Autofocus is a camera feature that fine-tunes the focus of the camera, it is a nice feature of this smartphone.
- Front camera
- 5 MP
- Rear camera
- 8 MP
3264 x 2448 px
This smartphone has a built-in GPS receiver. GPS is a satellite based navigation system that allows the determination of the exact geographical location on Earth. This Bluboo smartphone has FM radio receiver.
- 850 / 900 / 1800 / 1900
- Mobile network
- 2G / 3G
- Wi-Fi 802.11 a/b/g/n
- v4.0, A2DP
- FM radio
- microUSB 2.0
- 3.5 mm jack
The Li-Po 2150 mAh, non-removable battery gives the smartphone a good battery backup.
- Li-Po 2150 mAh, non-removable
The smartphone sensors measure physical quantities and transmit them to the application processor. The phones's accelerometer is a built-in electronic component that measures tilt and motion. A fingerprint sensor is one of the easiest and most secure ways to protect your smartphone. The proximity sensor detects when a user is holding the phone near their face during a call and turns off the display to prevent keypad presses and battery consumption from the display. The Xfire 2 has Dual SIM capability, which means that you can insert two different SIM cards and use them both from one phone.
- Dual SIM
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Bluboo Xfire 2, then don’t hesitate and signal the problem to us.
Bluboo Xfire 2 (XFIRE2) pictures
Bluboo Xfire 2's (XFIRE2) comparisons
According to our statistics, the Bluboo Xfire 2 smartphone was most often compared on our site with the following smartphones.
If there’s information about the Bluboo Xfire 2 that you would like to see on this site, then write to our firstname.lastname@example.org address.