Allview V2 Viper S (2016) review
The Allview V2 Viper S (V2VS) smartphone released in 2016. It is powered by Mediatek MT6753 chipset, 3 GB of RAM and 32 GB of internal storage.
The Allview V2 Viper S runs on Android OS v6.0 (Marshmallow) out of the box. It comes with a Li-Po 3000 mAh battery. It features a 5.5 inches IPS display with 1080 x 1920 px resolution. The IPS technology is one of the most leading LCD technologies in the world.
Table of contents:
Allview V2 Viper S (V2VS) specifications
- V2 Viper S
- 141 g
- 146 x 74.5 x 8.15 mm
- SIM type
- Micro SIM
The Allview V2 Viper S runs on Android OS v6.0 (Marshmallow) out of the box, but the V2 Viper S's firmware can be upgraded to a newer version of OS.
- Android OS v6.0 (Marshmallow)
- Mediatek MT6753
- Octa-core 1.3 GHz Cortex-A53
- Mali-T720 MP3
Screen size is measured in inches, diagonally from corner to corner. The 5.5 inches IPS capacitive touch screen with 1080 x 1920 px resolution is multitouch capable.
- 5.5 inches
- 1080 x 1920 px
The smartphone's memory (3 GB) cannot be expanded, but the storage (32 GB) can be expanded with a microSD card.
- 3 GB
- Internal storage
- 32 GB
- External storage
The camera of the Allview V2 Viper S is equipped with autofocus. Autofocus is a camera feature that fine-tunes the focus of the camera, it is a nice feature of this smartphone.
- Front camera
- 5 MP
- Rear camera
- 16 MP
4608 x 3456 px
- Triple LED
V2 Viper S is 3G and 4G capable. This smartphone has a built-in GPS receiver. GPS is a satellite based navigation system that allows the determination of the exact geographical location on Earth. This Allview smartphone has FM radio receiver.
- 850 / 900 / 1800 / 1900
- Mobile network
- 2G / 3G / 4G
- Wi-Fi 802.11 b/g/n
- v4.0, A2DP
- FM radio
- microUSB 2.0
- 3.5 mm jack
The Li-Po 3000 mAh battery gives the smartphone a good battery backup.
- Li-Po 3000 mAh
The smartphone sensors measure physical quantities and transmit them to the application processor. The phones's accelerometer is a built-in electronic component that measures tilt and motion. A fingerprint sensor is one of the easiest and most secure ways to protect your smartphone. The proximity sensor detects when a user is holding the phone near their face during a call and turns off the display to prevent keypad presses and battery consumption from the display. The V2 Viper S has Dual SIM capability, which means that you can insert two different SIM cards and use them both from one phone.
- Dual SIM
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Allview V2 Viper S, then don’t hesitate and signal the problem to us.
Allview V2 Viper S (V2VS) pictures
Allview V2 Viper S's (V2VS) comparisons
According to our statistics, the Allview V2 Viper S smartphone was most often compared on our site with the following smartphones.
If there’s information about the Allview V2 Viper S that you would like to see on this site, then write to our email@example.com address.